Item | Part # | Price | |||
|
| |||||
|
| |||||
Complete Sutton Exhaust Assembly (O-320) | SUTN201 | 1750.00 | |||
Complete Sutton Exhaust Assembly (O-360) | SUTN301 | 1750.00 | |||
|
| |||||
|
Complete assemblies include the following: | |||||
|
| |||||
Muffler Assembly (O-320) | SUTN202 | 995.00 | |||
Muffler Assembly (O-360) | SUTN302 | 995.00 | |||
Shroud Assembly | SUTN203 | 495.00 | |||
Riser (Cylinders 1&2) | SUTN204 | 95.00 ea. | |||
Riser (Cylinders 3&4) | SUTN205 | 95.00 ea. | |||
Bead Clamp (Risers) | V96941 | 25.00 ea. | |||
Clamp Bolts | AN3-4 (Set 16) | 16.00 | |||
Clamp Nuts | AN365-1032 (Set 16) | 8.00 | |||
Exhaust manifold gaskets | 77611 | 6.65 ea. | |||
STC Paperwork | Included with complete assembly kit | N/A | |||
|
| |||||
Optional | |||||
Heat Ribbons installed on muffler can. (High Heat Option) | 100.00 | ||||
45 Degree tailpipe extension (Use in place of original tailpipe) | 30.00 | ||||
3 Inch duct for Shroud Assembly (Use in place of original 2 inch input duct) | 20.00 | ||||
Pin Clamp (For tailpipe extension) | 20.00 | ||||
|
| |||||
Sky -Tech Starter | 149NL | 400.00 | |||
(Fly weight, 149 tooth ring gear. Fits within closed nose bowl.) | |||||
|
| |||||
Sky -Tech Starter | 122-12PM | 359.00 | |||
(Fly weight, 122 tooth ring gear, Special custom machined nose to fit within closed nose bowl ) | |||||
|
| |||||
Sky-Tec cable extension | 9.95 | ||||
(Required if there is no slack available in your starter cable) | |||||
|
| |||||
|
Note 1: Aircraft must be equipped with a light weight starter prior to the installation of this exhaust system. The above models have been verified to fit. However, this list is not intended to be all inclusive. The STC is specifically written to be compatible with any starter which provides adequate clearance. Note 2: Sky-Tec starters may require minor modification to front mounted oil cooler bracket.
| |||||